SALE - STARRETT
Saw Products Sale
Bondhus Sale
CLOSE OUTS
DeStaCo Sale
Helicoil Thread Repair Kit Sale
PRODUCT LINES
Products
Band Saw Blades
Carr Lane Products
Clamps
Cutting Tools
Hand Saws & Blades
Hand Tools
Jobsite & Construction Tools
Precision Measuring Tools
Bore Gages
Calipers-Dividers-Trammels
Data Collection Systems
Depth Gages
Fixed Gage Standards
Gage Block Sets
Granite Surface Plates
Hardness and Surface Testers
Height Gages
Hole Gages - Slot Gages
Indicator and Gages
Machinists Levels - Starrett
Micrometers
Precision Rules, Straight Edges & Parallels
Precision Shop Tools
Protractors & Angle Measurements
Slide Calipers
Squares and Combination Sets
Tool Sets
Threaded Inserts
Starrett Tape Measure Close Out Sale
Videos


85E Starrett 12* Carpenters and Sheet Metalworkers with Improved Extension Divider Legs Only
 
85E Starrett 12* Carpenters and Sheet Metalworkers with Improved Extension Divider Legs Only
    Quantity in Basket: None
    Price: $190.42
     
     
    Quantity:
     

    85E
    Starrett Carpenters and Sheet Metal Workers Divider
    12"


    The Starrett 85 extension dividers are exceptionally rigid although light
    in weight and easy to handle. The head is made of forged steel. The
    hardened points are well shaped and bent slightly so they can be rotated
    and brought closer together if desired.
    The sturdy construction of the joint, combined with the quadrant that
    projects through the legs and is frictionally locked by a knurled clamp nut,
    eliminates side deflection of the legs. A quadrant
    adjusting nut permits fine-adjustments for close
    measurements. A check nut located between the
    legs firmly locks the legs after proper adjustment
    has been made. This feature prevents the legs
    from moving in and out with the grain on wood
    when scribing, or sliding off rough spots when
    scribing on metal.
    A common pencil fits either arm. 88 Ball Points
    may also be used with this divider.

    85 Carpenters’ and Sheet Metal Workers’ Dividers
    With Divider Legs Only
    Complete with Divider Legs,
    Inside and Outside Legs
    Size*
    Catalog No.
    Catalog No.
    Inch
    mm
    85A
    85C
    7"
    175mm
    85B
    85D
    9"
    225mm
    85E
    85F
    12"
    300mm

     

    Capacity

    • The 7" (175mm) size will scribe or draw a
      22" (550mm) circle.
      The auxiliary caliper legs will caliper 11"
      (275mm) outside and 13" (325mm) inside.
    • The 9" (225mm) size will scribe or draw a
      30" (750mm) circle.
      The auxiliary caliper legs will caliper 14"
      (350mm) outside and 16" (400mm) inside.
    • The 12" (300mm) size will scribe or draw a
      40" (1000mm) circle.
      The auxiliary caliper legs will caliper 17"
      (425mm) outside and 19" (475mm) inside.