823CZ Starrett Tubular Inside Micrometer, 4-24* Range, with 7 Rods, with Case
Processing...

823CZ Starrett Tubular Inside Micrometer, 4-24* Range, with 7 Rods, with Case

Code: 823CZ

$466.83

Qty

Product Description

•••••

823CZ
Starrett Tubular Inside Micrometer Sets
4-24" range


The Starrett 823 Series micrometers are highly useful tools for internal
linear measurements such as measuring cylinders, rings, setting
calipers, comparing gages and measuring parallel surfaces.
The extension rods are made of steel tubing, light in weight, yet
extremely rigid. Rods are approximately 3/8" (9.5mm) diameter to
meet the requirements of mechanics who prefer this larger diameter.
By removing the hardened and ground anvil ends (end caps) of the
micrometer head, the rods may be attached to either or both ends of
the micrometer as preferred. Each rod may be individually adjusted for
wear by the hardened and ground anvil at the end.

  • Tubular measuring rods are lightweight, yet extremely rigid. Rods are
    insulated, with the exception of 1/2" (13mm) and 1" (25mm) sizes
  • Each rod is marked with length
  • Hardened and ground anvils on rods are adjustable for length.
  • Head anvil is hardened and ground
  • Interchangeable anvils on both 1/2" (13mm) and 1" (25mm) heads
    reading tools
  • Lock nut furnished on 1" (25mm) heads
    5-1/2" (140mm) long, convenient handle furnished on A, B,
  • F micrometers may be clamped where it will provide correct
    balance and reach
823 Tubular Inside Micrometer Sets (.001" Graduation)
Catalog No. Range Movement of Screw Description
823AZ
1-1/2-8"
1/2"
With 5 Rods and Handle
823BZ
1-1/2-12"
With 8 Rods and Handle
823CZ
4-24"
1"
With 7 Rods
823DZ
4-32"
With 8 Rods
823EZ
4-40"
With 10 Rods
823FZ
1-1/2-32"
1/2 and 1" (2 heads)
With 10 Rods and Handle
823M Tubular Inside Micrometer Sets (0.01mm Graduation)
823MAZ
40 -200mm
13mm
With 6 Rods and Handle
823MBZ
40-300mm
With 8 Rods and Handle
823MEZ
100-1000mm
25mm
With 10 Rods