|
B565A
Starrett Brass Drive Pin Punch 1/16"
- Our regular punches, made of hardened, tempered steel withstand
heavy duty work, but at times are too hard and can damage softer
materials . The new brass punches are ideal for these applications as
they are much softer than the steel version .
- The obvious disadvantage of brass punches is the same as their
advantage -they are much softer than hardened steel . Obviously, the
brass is less able to stand up to years of
hard use .
- Ideally, it is good to have sets of both
types and use the brass punches
only when there is the possibility
of damage to the work piece .
Available in eight individual
sizes from 1/16" to 5/16" and
as a full set of eight in an
attractive pouch .
| B565 Brass Drive Pin Punches |
Catalog
No. |
Length |
Diameter Punch |
Inch |
mm |
Inch |
mm |
B565A |
4" |
100mm |
1/16" |
1.5mm |
B565B |
3/32" |
2.5mm |
B565C |
1/8" |
3mm |
B565D |
5/32" |
4mm |
B565E |
3/16" |
5mm |
B565F |
7/32" |
5.5mm |
B565G |
1/4" |
6mm |
B565H |
5/16" |
8mm |
SB565Z |
Set of 8 Punches (1
of Each Size) in Protective Vinyl Case |
|
